(신제품)독일 VISION-150W 레이저용접기
Technical specification
더많은제품정보 및 문의하기 ☜
Technical specification
Beam source: | Nd:YAG |
Pump source: | Flash lamp |
Wavelength: | 1064 nm |
Operation mode: | Pulsed |
Maximum average power: | 150 W and 200 W |
Maximum pulse energy: | 80 Joule / 100 Joule |
Maximum peak power: | 10 kW max. |
Spot diameter - Ø: | 0,2 µm - 2,5 mm |
Focal lenght: | 190 mm (90, 120 or 300 mm on request) |
Pulse character: | Over voltage or PWM function |
Pulse duration : | 0,5 ms - 20 ms |
Pulse repetition frequency : | 1 - 20 Hz |
Pulse fill mode: | 10 - 100% Hz |
PWM: | 1 - 100% |
Pulse character: | free programmable |
Every system is microprocessor controlled in all the functions and equipped with an automatic self diagnosis system. Every system has CAN and RS 234 interfaces at its disposal. | |
Energy measuring system: | integrated |
Microscope: | Leica Top with eye-piece x 20 ** |
Shielding gas: | with 3 inputs and microprocessor controlled Delay (1 input is standard) |
Cooling: | 120 w closed water/air heat exchanger 200 w water/water heat exchanger with temperature operated load control. |
Supply voltage: | 120 W type: 380 volts, 3 phases, 50/60 hz, 4 KW 200 W type: 380 volts, 3 phases, 50/60 hz, 8 KW |
더많은제품정보 및 문의하기 ☜
'기타기계' 카테고리의 다른 글
마그네틱드릴(Chamfering machine) (0) | 2009.10.17 |
---|---|
무멘드릴벤딩기 (0) | 2009.10.15 |
마그네틱드릴(Chamfering machine) (0) | 2009.10.12 |
자동성형 유압프레스 (0) | 2009.09.29 |
자동진공성형 유압프레스 (0) | 2009.09.29 |